|
Post by SPOOLD on Feb 5, 2007 8:01:00 GMT -5
ben its because you have to run it gvr4 style and clock the compressor housing up and out at a 45' angle.
pretty tubes there dano
|
|
|
Post by wishihadatalon on Feb 5, 2007 11:48:52 GMT -5
ben its because you have to run it gvr4 style and clock the compressor housing up and out at a 45' angle. pretty tubes there dano NO the turbo would still have to sit inside of the motor mount.
|
|
|
Post by SPOOLD on Feb 5, 2007 16:18:50 GMT -5
oh man i think i get what you mean now. um.... cut back a little material from the collector where it meets the flange and re-weld a flange and a slightly better angle maybe? or just trim the front motor mount depending on how much clearance is needed. i know my buddy had to do that with a hahn t3 td06 20g on a turbonetics cast mani for his 1g.
|
|
|
Post by wishihadatalon on Feb 6, 2007 1:00:40 GMT -5
oh man i think i get what you mean now. um.... cut back a little material from the collector where it meets the flange and re-weld a flange and a slightly better angle maybe? or just trim the front motor mount depending on how much clearance is needed. i know my buddy had to do that with a hahn t3 td06 20g on a turbonetics cast mani for his 1g. Bah I am sure we will just find a mani that will work.
|
|
|
Post by dizzum_D on Feb 10, 2007 23:54:37 GMT -5
Quit jackin my thread bitches lol. Got my new clutch disk in. Woot!
|
|
|
Post by dsm on Feb 11, 2007 0:34:41 GMT -5
oh how i love their revised shit.
|
|
|
Post by dizzum_D on Feb 20, 2007 0:04:34 GMT -5
|
|
|
Post by pinder91 on Feb 20, 2007 3:22:49 GMT -5
Pretty slick!!!
|
|
|
Post by badev0 on Feb 21, 2007 11:33:43 GMT -5
nice pump setup. i went a different route w/ mine.
|
|
|
Post by dizzum_D on Feb 21, 2007 12:47:33 GMT -5
|
|
|
Post by SPOOLD on Feb 21, 2007 13:59:45 GMT -5
mm gas. not a bad idea on the mounting.
hey dano, what exhaust is that too btw?
|
|
|
Post by dizzum_D on Feb 21, 2007 14:17:53 GMT -5
I beileve its a Thermal, at least thats what it says on the tip. I like it.
|
|
|
Post by wishihadatalon on Feb 21, 2007 15:16:28 GMT -5
Brent I might have a nice 3" system forsale soon
|
|
|
Post by SPOOLD on Feb 21, 2007 16:37:21 GMT -5
your rnr?
|
|
|
Post by wishihadatalon on Feb 21, 2007 16:54:42 GMT -5
I still haven't decided but that is the one.
|
|