|
Post by 99gst_racer on Sept 9, 2012 18:29:51 GMT -5
Anybody need any parts? The body is in rough shape, but most of the interior is in great shape. The cloth seats are some of the best condition that I've seen.
I'll post pics in a bit.
Post/text/email if you need anything.
|
|
BlacKWiDoW
Full Member
"Life at half speed is only half lived!"- Zach Brunsink 2008
Posts: 193
|
Post by BlacKWiDoW on Sept 10, 2012 22:56:34 GMT -5
1G MAS???
|
|
|
Post by 99gst_racer on Sept 11, 2012 13:22:48 GMT -5
No stock MAS. It was running a GM MAS. And I do have it for sale.
|
|
|
Post by 99gst_racer on Sept 11, 2012 13:24:14 GMT -5
Here's a list of stuff off the top of my head. I also have headlights, taillights, and bumper covers if anyone wants them.
6-bolt longblock - Balance shafts eliminated, new timing belt, pulleys, and auto-tensioner. Also has ARP head studs. Asking $400. pickup only
Stock radiador - It's realativily new and in excellent condition. $30
Stock manual transmission. Includes t-case. $300. pickup only
FMIC kit. 12x24x3 bar and plate core. Come with HKS bov and alot of SS piping, couplers, and t-bolt clamps. $200
No-name adjustable fuel pressure regulator. Comes with a liquid filled Allstar Performance gauge, and some lines to connect it to a DSM fuel rail. $SOLD
Used Fidanza aluminum flywheel. Fits any 6-bolt AWD application. This has around 1000 miles on it. The friction surface shows wear, but it's is very evenly distributed. It is 100% usable as it is. I will also include the bolts to bolt it to the crank. Asking $100 shipped. I will also include a brand new friction surface and bolt kit for an extra $35.
1G front strut tower bar. Aluminum and adjustable. Very lightweight. One of the nicer ones that I've seen. $40 + shipping.
SS 3" turboback exhaust. It also has a 3" electric cut-out right after the downpipe. $200. pickup only
Front seats. Grey/rainbow cloth. They are in excellent condition for their age. $40 for the pair. pickup only
Apline CD player and Alpine EQ. Selling these as a drop-in unit for any 1G. Remote included. More info on models in a bit. Pics too. $100
JM Fab exhaust manifold heatshield. Fits any SBR cast manifold or stock manifold. Has provision for wastegate off #1 runner. $25
GM MAS MAF with couplers and ECMlink cable - Asking $90 plus shipping
Polished 2G fuel rail with -6 AN fittings - I had this polished to a mirror a couple years ago. It still looks good, but could use a good buffing. It's drilled and tapped for AN fittings. -6 in and out. $60 shipped.
TiAL 38mm wastegate. Includes dumptube and 2 used copper gaskets. $110.
non-cruise throttle cable. $SOLD
BC 272 cams - Less than 1000 miles of run time. $210
Prothane engine mounts - installed - Includes both sides and front, no rear. $60
Clutch pedal assembly - welded - $50
Walbro 255 - used, $50 shipped
ACT 2100 clutch kit - brand new, full-face organic street disc. $280
OEM 6-bolt water pump - Only has a couple hundred miles on it. Still looks brand new. $50
OEM 1G knock sensor - Only has a couple hundred miles on it. Still looks brand new. $30
2G alternator - Very clean and works great. $50
|
|
|
Post by 99gst_racer on Sept 11, 2012 13:27:36 GMT -5
|
|
|
Post by turbo2liter on Sept 12, 2012 8:09:08 GMT -5
any issues with the trans?
|
|
|
Post by 99gst_racer on Sept 12, 2012 11:53:34 GMT -5
any issues with the trans? None that I know of. The car was daily driven with this trans prior to being parked after the turbo broke it's shaft. But I'm pretty sure a guy is coming to pick up the trans on Saturday morning. We'll see.
|
|
|
Post by 99gst_racer on Sept 12, 2012 11:55:50 GMT -5
|
|
|
Post by meteorgreya4 on Sept 12, 2012 15:14:41 GMT -5
Howdy,
Does the GM MAF come with the DSM link to ECU cable? (I.E doesn't require a GM MAF Translator)
|
|
|
Post by 99gst_racer on Sept 12, 2012 16:49:28 GMT -5
Howdy, Does the GM MAF come with the DSM link to ECU cable? (I.E doesn't require a GM MAF Translator) Yes it does. It's that cable there in the pic.
|
|
|
Post by meteorgreya4 on Sept 13, 2012 9:32:21 GMT -5
Are you by chance selling the ECU and DSM link as well? If so, I'm interested. ;D
|
|
|
Post by 99gst_racer on Sept 13, 2012 11:47:33 GMT -5
I sold the ECU and Link on Monday.
I'm working quick on this part-out. The car will be completely gone by early next week, so if you need anything, jump on it quick!
|
|
|
Post by tsimac on Sept 13, 2012 16:26:30 GMT -5
Is it a non ABS car? If so I could use one of the RR trailing arms (Houses the bearing). I don't remember if it was drivers or passangers. I will have to check which one when I get home this weekend.
|
|
|
Post by meteorgreya4 on Sept 14, 2012 10:01:32 GMT -5
Thanks for the info.
|
|
|
Post by dizzum_D on Sept 14, 2012 10:54:41 GMT -5
Is it a non ABS car? If so I could use one of the RR trailing arms (Houses the bearing). I don't remember if it was drivers or passangers. I will have to check which one when I get home this weekend. No abs
|
|