|
Post by pinder91 on Nov 21, 2006 0:42:21 GMT -5
-Full '99 OEM black interior (EVERYTHING) -4300k HID retrofit -6 bolt w/ 2g pistons/ 1g "big" rods, stockish head with 264/272 cams, Cyclone intake manifold -Trans back to TRE to get looked at, along with new clutch fork, pivot ball, master and slave - -6an braided ss fuel line from tank to rail along with a Walbro 255hp with AFPR - EVO Brembo brakes and JDM Galant front knuckles, braided ss brake lines - EVO steering wheel - EVO shift knob - RMDSM sway bars - new FMIC/piping setup - DSMLink V2 - new wheels (Lafond, those RPM2's are looking a little dated ) - 3000GT glacier white pearl paint to go on the freshly restored body (all rust taken care of, fresh undercoating, anything that can be unbolted will be painted/powdercoated, dents gone) - '99 hatch w/third brake light - tint -hoping to trade my Apex'i N1 for an RNR -have working reverse lights! -EDM tail lights - 50-trim mounted on the new SBR mani w/ a Tial 38mm - Aluminum door handle replacements from www.redefinedrides.com/handles.html - super secret ram air setup All of this in no particular order. Maybe I'll finish something before Christmas.
|
|
|
Post by pinder91 on Nov 21, 2006 0:46:36 GMT -5
Black interior so far: -center console w/shift boot -scuff plates -kick panels -interior door handles -e-brake handle -trunk/gas door release switches -97-99 clothing hooks -dash vents -ac/cruise/fog light switches/trim (All OEM, Lafond )
|
|
|
Post by phoenix4g63t on Nov 21, 2006 1:14:27 GMT -5
That glacier white is gonna look hot. Are you planning on going with a CF hood, something else, staying stock?
|
|
|
Post by pinder91 on Nov 21, 2006 2:51:45 GMT -5
I've thought about a CF hood, but haven't made up my mind yet... More than likely not, but you never know.
Body will remain STOCK.
|
|
|
Post by sourcelx on Nov 21, 2006 6:49:39 GMT -5
Thats alot of shit,lol. Sounds peeerdy.
|
|
|
Post by SPOOLD on Nov 21, 2006 7:46:26 GMT -5
no edm tails?
|
|
|
Post by BoomBoom on Nov 21, 2006 8:29:51 GMT -5
|
|
|
Post by absinthminded on Nov 21, 2006 10:55:54 GMT -5
Let me know if you need any help. I'm starting to get a decient set of tools, and I'm close. What I don't have for tools, Elmo has 3 of them.
BTW:"JDM Galant front knuckles" What do you want those for?
|
|
|
Post by blackGSX2g on Nov 21, 2006 11:46:47 GMT -5
Ya know Pinder, those RPM2s are sitting in a heavily guarded and fortified portion of my garage right now
|
|
|
Post by pinder91 on Nov 21, 2006 14:33:03 GMT -5
Shit!!! I forgot. Let me know if you need any help. I'm starting to get a decient set of tools, and I'm close. What I don't have for tools, Elmo has 3 of them. BTW:"JDM Galant front knuckles" What do you want those for? Thanks man, but the car is up in GR, so I'm not really going to be working on it all that much. The 2g front knuckles don't bolt up to the EVO calipers, but the JDM Galant ones do. Ya know Pinder, those RPM2s are sitting in a heavily guarded and fortified portion of my garage right now I figured you lost them already. I'm amazed the leprechauns could fit 18's down the drain though.
|
|
|
Post by blackGSX2g on Nov 21, 2006 14:53:23 GMT -5
Ya know Pinder, those RPM2s are sitting in a heavily guarded and fortified portion of my garage right now I figured you lost them already. I'm amazed the leprechauns could fit 18's down the drain though. Hahaha...well I'm still lookin for the HP EVOs, some nice silver 5-spokes, or a good set of bronze ones. I'll keep ya posted.
|
|
|
Post by pinder91 on Dec 13, 2006 19:37:15 GMT -5
Ok, I'm contemplating replacing the 16g with a 50-trim, but I can't decide. I really want the dragon on both of my cars, and considering it is unnecessary for so small a turbo... Opinons?
|
|
|
Post by SilverGST on Dec 14, 2006 2:19:01 GMT -5
your buildin the motor up a bit mine as well up it to a fidy trim as well.
|
|
|
Post by pinder91 on Dec 23, 2006 17:30:15 GMT -5
Update: Thanks to Christmas Vacation I had some time to get crackin. ;D After this many miles, its time to pamper the car. Removed fenders, bumpers, lights, sideskirts, spoiler. Gutted the rear. The fun part. Should have more updates in a day or so...
|
|
|
Post by autox4fun on Dec 23, 2006 19:42:50 GMT -5
I would say "lookin' good" but not just yet.... keep up the hard work! inch by inch your making good ground! Btw thanks for the help on Wednesday You are the king! Peace Randy
|
|