|
Post by Ecl1psE5 on Mar 26, 2009 17:07:52 GMT -5
That looks very intesting. Nice job But i was just looking, did you test fit the pannels back on yet? it just seems pretty high up.
|
|
|
Post by wishihadatalon on Mar 26, 2009 17:13:38 GMT -5
no but I plan to do that this weekend. Based on my the measuring that I did, it should fit without any issues. That is why I had to go over the shifter. Behind it did not offer any locations that would make it work. I will get better pictures this weekend with my digital camera, I guess the 3.2mp camera on the b.b. storm isn't that great
|
|
|
Post by pinder91 on Mar 26, 2009 19:13:04 GMT -5
I think my teacher would frown on me making another for someone else Just tell him that you've made a revision.
|
|
|
Post by dizzum_D on Mar 26, 2009 19:38:20 GMT -5
Yea tell him you broke it duhh.
|
|
|
Post by wishihadatalon on Mar 26, 2009 20:12:19 GMT -5
haha I will ask him about it.
|
|
|
Post by wishihadatalon on Apr 9, 2009 21:39:29 GMT -5
Finally have it done. Fitting of the panels will take a little trimming but nothing that is going to be serious Also this weekend I will be cleaning up my Canadian seat belts and panels and probably painting them black like I did with my previous interior.
|
|
|
Post by dizzum_D on Apr 9, 2009 21:43:56 GMT -5
That looks badass teej.
|
|
|
Post by wishihadatalon on Apr 9, 2009 21:50:56 GMT -5
Thanks, I really would like to find an awd car to test it on. Anyone want to volunteer?
|
|
|
Post by prdsm on Apr 9, 2009 21:53:29 GMT -5
That a nice set, so you are going to run your e bake hydralicly? how are you going to connect the rear brakes? Are they going to be working with the front brake when the e-barke is not in use or will it end up being the front work with the pedal and the back with the hancle. Looking very interesting.
depending on how it work since my car is my only car, if you are up for it we can try it on my car. I think it would be fun.
After I get all my other parts in( 550cc, gm maft, safc, afpr, ect). ;D
|
|
|
Post by pinder91 on Apr 9, 2009 22:06:45 GMT -5
I'm ready!
|
|
|
Post by wishihadatalon on Apr 9, 2009 22:16:41 GMT -5
tie in will be after the proportioning valve with both rear brake lines. Both lines will run into a Y and then enter the master cylinder. Outlet will run back and split via a Y and go to the rear brake calipers.
Pinder, I would love for you to try it but your car is very far from being ready. I think that I could have the bracket made again though. It will probably be in the fall when I have another made though that way I don't have my teachers making a fuss.
|
|
|
Post by cloons411 on Apr 9, 2009 23:01:07 GMT -5
Also this weekend I will be cleaning up my Canadian seat belts and panels and probably painting them black like I did with my previous interior. Don't lie! You didn't paint the other panels!
|
|
|
Post by pinder91 on Apr 9, 2009 23:03:19 GMT -5
Good deal.
|
|
|
Post by 99gst_racer on Apr 9, 2009 23:25:49 GMT -5
Damn, I really like that. Nice work, TJ.
|
|
|
Post by pumpgasgsx on Apr 10, 2009 8:12:06 GMT -5
I need that staging brake setup, like today! I've been putting that off to finish other things and you already figured it out You think that would go on a 2g?
|
|