|
Post by spaz100 on Apr 21, 2009 17:17:27 GMT -5
nice man. give me a shout if you ever want a hand with it. i spend most of the week in plainwell as it is. oh and dont forget to put a working battery on that list too so you can actually drive it this time. TROOF! thanks for the offer, i might have to take ya up on that cause t-belt time is comin up soon. oh ya it is a punishment kit, its not the one i really wanted but it can flow 50 cfms more than my turbo, so i should be good for a while.
|
|
|
Post by dsmphreak3 on Apr 22, 2009 3:32:20 GMT -5
by the Post Office in Plainwell if u want a hand
|
|
|
Post by spaz100 on May 20, 2009 16:33:31 GMT -5
have some new updates, -took everything off in the front of the engine -cleaned out some of the exh manifold stud holes, had to helacoil 3 of em which was pretty scary since i've never done that before -threw on the ss studs & nuts -polished and threw on the fp manifold -threw on the turbo & o2 housing -also decided to put an exhaust flex hose to extend the o2 dump, it pointed right in front of the oil pan and oil line, and i dont like fires. i'm hoping it wont interfere with the fmic piping. Finally got my punishment fmic kit and ss fuel line kit in the mail, took stm over a month to finally get it to me. :/ BTW, a sidenote. I would advise not getting the ss drain line from extreme psi if it can be avoided. that thing was a PITA to get together and was almost impossible to match up right with the holes. the ss line just isnt flexible enough because its so short, so i ditched it and went with the stock line, it doesnt leak so i'm going to stick with that for now.
|
|
|
Post by SPOOLD on May 20, 2009 19:50:58 GMT -5
looks good man. that sucks about the return line though. also, i've got about a half a role of black dei header rap left over you can have for that dump tube/licp if you're worried about heat or it contacting. worked very well when i had a similar setup on my old galant.
did they throw the lollipop in there as a gift because it took soo long?
|
|
|
Post by spaz100 on May 20, 2009 21:21:36 GMT -5
i'll see how the install goes and i'll let ya know, thanks for the offer!
ya and the lollipop came with it...
|
|
|
Post by spaz100 on Jul 1, 2009 22:26:48 GMT -5
FINALLY got everything together. I'm probably the slowest guy on here, but I got it done and ready to fire up. Pepsi bottle catch can lives! I'm still going to recirc the BOV as soon as i can cobble together some sort of pipe, but i think if i can get my hands on a 2g recirc tube i may be able to make it work still looks a little ugly, I havent hacked the bumper yet or the bumper cover so thats next, but i was so eager to get it to run tonight..... But then...... battery was dead. again. for the 2nd time now when everything else was ready to go. So i'll have to wait for a charge before i can do easy things such as change settings on the ecu or even crank it over.
|
|