|
Post by 99gst_racer on Apr 20, 2007 11:26:13 GMT -5
I'll be dropping my engine in next week, and I'll need to fab up a new upper intercooler pipe and elbow. I've been searching for just a throttle body flange for my 1G TB, but I can't seem to find one anywhere.
I've checked the websites of the following vendors: Magnus, Punishment, SlowBoy, AMS, Buschur, eBay, ExtremePSI, JM Fab, and JNZ. I don't know where else to look.
I need it to be stainless steel, 1/2" thick, an to have a 2.5" opening. Basically, I'm looking for the same one that is used with the TB elbow on the SBR intercooler kits.
If anyone knows of a vendor that has these in stock and available, please let me know asap.
|
|
|
Post by blackGSX2g on Apr 20, 2007 11:57:44 GMT -5
|
|
|
Post by blackGSX2g on Apr 20, 2007 12:14:43 GMT -5
|
|
|
Post by 99gst_racer on Apr 20, 2007 13:59:45 GMT -5
Yeah, I found the one on eBay, but it's mild steel and it was only 3/8" thick. And I definitely don't want to use aluminum. And I was hesitent about the RRE one because it's only a 2 3/8" hole. I'll have to measure my old SBR elbow tonight and see if it is truely a 2.5" hole....
|
|
|
Post by BMan on Apr 20, 2007 14:05:58 GMT -5
could be 2.5" OD. and RRE is talking about the ID. Just thought I'd thow that out there.
|
|
|
Post by 99gst_racer on Apr 20, 2007 15:09:52 GMT -5
|
|