|
Post by spaz100 on Feb 27, 2008 17:41:45 GMT -5
i'm trying to find some ss flex lines for my 18g. i wanted to get both the coolant and oil lines, due to the fact that i dont think the stock ones will quite match up. i checked around but i only seem to find some for garret t3/t4 turbo's.
anyone know where to get some?
|
|
|
Post by Ecl1psE5 on Feb 27, 2008 20:45:34 GMT -5
|
|
|
Post by SPOOLD on Feb 28, 2008 10:01:18 GMT -5
unless it was a 16g with an 18g wheel put on or some variant, like aaron said a typical 18g cartridge doesnt have coolant lines. you're correct in that only your stock oil return line would be able to be used. the 13g and most of the other td04 uses all one step smaller fittings and lines than the standard td05h 14b and larger. you could definitely make stainless coolant lines if you wanted but it'd get a little pricey to do it right. i'd have to guess as much as $50 per
|
|
|
Post by spaz100 on Feb 28, 2008 10:50:44 GMT -5
i guess it must be made off of a 16g then, cause it has the holes for the coolant and oil lines, i'll have street n strip take a look at it and see if they can make some.
|
|