|
Post by sourcelx on Oct 1, 2009 21:32:22 GMT -5
So recently out of nowhere in my talon, while shifting into 2nd gear it became notchy(sp). It doesnt grind but kinda clunks into gear(no sound just feel).It doesnt do it all the time but more than most.It also doesnt really do it when down shifting into 2nd. I'v checked the shift links in the engine bay for clearance and to make sure everything was tight and secure. I also check the links on the shifter itself and all seemed good. I just recently installed: act flywheel, act 2100 clutch kit, oem tob w/clip, clutch master, pivot ball, and fulcum fork(sp).
There arent any leaks that I can find either. Any idea?
|
|
|
Post by doggietom on Oct 2, 2009 8:06:38 GMT -5
check all you motor/ drive shaft mounts
|
|
|
Post by sourcelx on Oct 2, 2009 15:31:43 GMT -5
I'v looked over the motor ones but not the driveshaft ones yet. Rains been keeping me from getting this thing on jack stands.
|
|
|
Post by prdsm on Oct 2, 2009 19:50:24 GMT -5
hopefully you find the problem soon it is starting to get cold out. saw my old talon today and the guy just beats the livving shit out of it all the time, it wont last too long in his hands.
|
|
|
Post by sourcelx on Oct 2, 2009 22:04:48 GMT -5
Hell, cold doesnt stop me. Last year I was snding my eclipse with snow surrounding the car. Im not a fan of this cold rain though.
|
|
|
Post by sourcelx on Oct 5, 2009 18:56:54 GMT -5
So it looks like Im going to be dropping the tranny. I try'ed to adjust the clutch thinking maybe thats the issue, But when push the slave in it onl comes part out then I have to push it the rest of the way. It also makes a click as I do this. So I think Ima pull her and find out why. Here's some bad video's of it(sorry it was getting dark). Both are pretty much the same.
|
|