|
Post by dsmstroker on Oct 9, 2009 8:02:33 GMT -5
I know the dealer spec's are 62-72 ft lbs of torque on the head studs. I ran 68 dumb I know, what is the correct torqe? I use ARP studs, and a multi layer gasket.
|
|
|
Post by laser92 on Oct 9, 2009 8:49:04 GMT -5
85-90 if I remember correctly, and it's a good idea to bump them again after a few miles. Just torque in the proper sequence, and step them. I start with a regular socket wrench then torque to 50, then 70 then 90, all in sequence. Moly Lube too
|
|
|
Post by dsmphreak3 on Oct 11, 2009 0:20:21 GMT -5
+1 on the step-torque.
|
|