|
Post by 04evo8 on Apr 1, 2010 14:08:36 GMT -5
Looking to put a bov on my 04 evo and was wondering what the other evo owners are running. I have been told that evos can have problems at low rpms if a bov is used.... thanks for your imput
|
|
|
Post by SPOOLD on Apr 1, 2010 19:28:15 GMT -5
buy a metal one from a ix and be set
|
|
|
Post by sourcelx on Apr 1, 2010 20:05:58 GMT -5
I dont own a evo(yet), but I'v heard the same.
|
|
|
Post by badev0 on Apr 1, 2010 20:56:20 GMT -5
buy a metal one from a ix and be set x2
|
|
|
Post by 04evo8 on Apr 2, 2010 7:23:57 GMT -5
thanks guys
|
|
|
Post by 04evo8 on Apr 3, 2010 9:26:30 GMT -5
Purchased my evo 9 metal valve today along with my kelford 272 cams, 255 fuel pump, 1000cc injectors, and water/meth kit. Just waiting for them to come in and install then off to ams for a dyno tune
|
|
|
Post by badev0 on Apr 3, 2010 21:24:40 GMT -5
Good choice on the mods. What turbo?
|
|
|
Post by dizzum_D on Apr 4, 2010 2:33:00 GMT -5
He's running the stocker for now, but I'll try to talk him into a 9's hotside.
|
|
|
Post by badev0 on Apr 4, 2010 4:31:30 GMT -5
He's running the stocker for now, but I'll try to talk him into a 9's hotside. I will have one here off my car early this week when I throw on the new turbo.
|
|
|
Post by 04evo8 on Apr 4, 2010 11:31:09 GMT -5
what turbo r you going to run? I was thinking sometime this summer going to a fp red...
|
|
|
Post by badev0 on Apr 4, 2010 13:25:19 GMT -5
i picked up hta green for cheap off the forums. itll do well with e85
|
|
|
Post by 04evo8 on Apr 8, 2010 10:16:44 GMT -5
I found a 10.5 SINGLE FLAPPER TURBINE HOUSING online and it is only 250.00 what do you guys think? Would it be a good buy or should i just save and buy a new turbo?
|
|
|
Post by badev0 on Apr 8, 2010 10:21:50 GMT -5
I found a 10.5 SINGLE FLAPPER TURBINE HOUSING online and it is only 250.00 what do you guys think? Would it be a good buy or should i just save and buy a new turbo? just save
|
|
|
Post by 04evo8 on Apr 8, 2010 10:24:09 GMT -5
thanks
|
|
|
Post by 04evo8 on Apr 13, 2010 23:51:35 GMT -5
I got my egr block off in today. Have you guys had any problems with taking all the egr stuff out and your car showing an error code? I have not installed it yet but i have read that this will happen if you dont get it changed in your computer... I also got my injectors, fuel pump, cam and water/meth kit in. Now its time to go to ams
|
|