|
Post by 99gst_racer on Nov 18, 2010 16:40:26 GMT -5
I'm selling my used 3" SS Thermal Research & Development cat-back. This will fit any 2G AWD car. The flange has been swapped out for a v-band flange. I will also include a v-band clamp, spare flange, and a length of SS pipe to adapt it to your car. OR, I can include my downpipe with it, as I won't be needing it anymore either. The downpipe is made of 3" SS, has a SS flex section, and uses v-band connections as well. The downpipe will not work with a factory-style O2 housing. It begins directly underneath the front of the oil pan. Perfect for any custom application. Catback by itself: $350 OBO Cat-back with downpipe: $450 OBO Pick-up only, please. PM me or post any questions. This is the complete thing, downpipe and all (the one on the right): This pic shows the difference between my downpipe and a traditional downpipe:
|
|
|
Post by 99gst_racer on Dec 4, 2010 22:55:48 GMT -5
Still got it. I'm open to offers.
|
|
|
Post by 99gst_racer on Dec 4, 2010 23:05:54 GMT -5
|
|
|
Post by awd92talontsi on Dec 6, 2010 16:49:11 GMT -5
I'm not interested in the exhaust but our race team has a used 20 gallon aluminum tank. Alot bigger than what you're looking for. Let me know if you're interested and I'll snap some pics of it. Bryan
|
|
|
Post by 99gst_racer on Dec 6, 2010 17:04:23 GMT -5
Thanks man, but that's the largest one I can fit, and RCI is the only one that puts a sending unit in a 10-gallon aluminum cell.
|
|
|
Post by laser92 on Dec 6, 2010 18:42:09 GMT -5
2g's must have smaller trunks? I've got a 16 gal in the back of my red car, with room to spare.
|
|
|
Post by 99gst_racer on Dec 6, 2010 21:44:54 GMT -5
2g's must have smaller trunks? I've got a 16 gal in the back of my red car, with room to spare. Mine's not nessacerily going to be in the interior. But the distance between the rear sheemetal and the rear sway bar is like 18". So, not much will fit there. There's no height in the ass end either. I already tried to fit an Allstar can, and that wasn't even close.
|
|
|
Post by laser92 on Dec 7, 2010 8:32:15 GMT -5
ah, I see, your not putting it behind the rear axle I understand?
|
|
|
Post by laser92 on Dec 22, 2010 15:25:30 GMT -5
|
|
|
Post by 99gst_racer on Dec 22, 2010 17:40:50 GMT -5
Thanks for the heads up man, but I gotta have that specific RCI part number. The RCI one is the only 10-gallon cell that I found that would fit (dimensionally) and also had a sending unit. The sending unit is the kicker. Most fuel cell manufacturers dont use a sending unit in anything smaller than 15 gallons. I'm in no hurry for the cell either. If I can't trade something for that specific RCI cell by the time I need it, I'll just end up ordering it anyway. I really can't believe this exhaust hasn't had any interest at $250...
|
|
|
Post by 99gst_racer on Jan 12, 2011 10:29:03 GMT -5
No longer for sale. I'm going to install this on my new DD. Aaaannnd, I just recently bought that fuel cell too.
|
|