|
Post by 99gst_racer on Apr 14, 2011 22:57:59 GMT -5
|
|
|
Post by 99gst_racer on Apr 14, 2011 23:02:14 GMT -5
|
|
|
Post by dsmrook on Apr 15, 2011 0:18:16 GMT -5
TIG work looks great man. Question, have you TIG'd a lot of cast through the years?
|
|
|
Post by 99gst_racer on Apr 15, 2011 10:44:01 GMT -5
Yeah, Todd's a fantastic welder. He's done ALOT of cast over the years, including some cast steel for me. He doesn't like to weld cast iron, but he ends up doing alot of it for two local marinas that have hand fulls of people that don't properly winterize their boats every winter. He doesn't garuntee any cast iron work, but he will for cast steel.
|
|
|
Post by sourcelx on Apr 15, 2011 18:10:11 GMT -5
Amazing work. Quite inspiring. I wish I had a real welder instead of my 120 flexcore mig so I could make cleaner welds.
|
|
|
Post by SPOOLD on Apr 17, 2011 12:29:40 GMT -5
cool stuff paul! dale's bike looks sick!
|
|
|
Post by Agent11br on Apr 17, 2011 18:53:10 GMT -5
pretty epic man, solid stuff
|
|
|
Post by dsmrook on Apr 17, 2011 19:14:37 GMT -5
He doesn't garuntee any cast iron work, but he will for cast steel. Yeah for sure, cast iron can definitely be a pain. Fab work looks great though man. Is most of the welding on that stuff done by him or do you have a welder that you play around with?
|
|
|
Post by 99gst_racer on Sept 13, 2011 11:25:43 GMT -5
|
|
|
Post by sourcelx on Sept 13, 2011 14:21:41 GMT -5
SICK! That sir, is quite impressive if I may be so boldest to say.
|
|
|
Post by laser92 on Sept 13, 2011 15:29:54 GMT -5
nice work! , I've got the same thing in mind for MY 10cm 14b housing. Reminds me of Tyler's holset housing.
|
|
|
Post by 99gst_racer on Sept 14, 2011 8:43:13 GMT -5
Thanks fellas! I'm very happy with how it turned out.
|
|
|
Post by 99gst_racer on Apr 2, 2012 11:19:32 GMT -5
|
|
|
Post by tsimac on Apr 2, 2012 20:20:56 GMT -5
I want one for my 1G
|
|
|
Post by 99gst_racer on Apr 30, 2012 13:12:00 GMT -5
I'll probably tackle a 1G rear subframe this fall. I know Tyler wants one for his 1G as well. Here's a couple pics after powdercoating:
|
|