Post by Ecl1psE5 on Jun 12, 2011 21:59:08 GMT -5
Hey guys.. I wanted to post this stuff up here first before xceedspeed and dsmtuners. If your interested in anything, please send me a PM or E-mail me at Ecl1psE5@comcast.net.
I just installed my BW s256 ET Turbo, and so I have my old 18g setup as well as an HX setup for sale.
1. 7-blade HX35W turbo in BEP Mitsu bolt on housing - SOLD
Next up is a few parts from my 18g setup. The turbo is possibly sold to Brent, but the rest is up for grabs. If something changes I'll be sure to post it up here, But its in rough shape. It needs a rebuild and had its compressor cover modified.
2. Punishment Racing mild steel 2.5" O2 housing. - $75.00
This was a direct replacement for the stock O2 housing. New they are $160.99, Given the condition and few years of use, I'll talke $75.
stores.punishment-racing.com/-strse-15/Mild-Steel-Recirculated-o2/Detail.bok
3. Forced Performance DSM Race Manifold with the 4 top bolts into the turbo - SOLD
49_983.jpg[/IMG]
4. Custom J-Pipe for a FMIC - SOLD
Also found some old stuff in storage I dont need.
5. Random IC pipes - Also from that FMIC kit from ETS. I have replaced them with different pipes. - Best Offer
one is a 45 flanged for 1g BOV, one is a 45 and longer section with no flange on it, and one is the same pipe with a greddy BOV flange on it. You figure out how to make them work for you.
6. Crushed 1g BOV - $25.00
7. Non Crushed 1g/colt BOV - This thing has its top clocked slightly different, and I was bored so I cleaned all the green off the top. - $25.00
*Please note, the Greddy BOV pictured on these pipes I no longer have.
8. Used Stock Cams and Gears from my 98 7-bolt 5 speed Talon. - Best offer
They had around 120k when they were removed from my motor. Both are marked with "A" on the ends.
Well, I think thats all for now. Thanks!
I just installed my BW s256 ET Turbo, and so I have my old 18g setup as well as an HX setup for sale.
1. 7-blade HX35W turbo in BEP Mitsu bolt on housing - SOLD
Next up is a few parts from my 18g setup. The turbo is possibly sold to Brent, but the rest is up for grabs. If something changes I'll be sure to post it up here, But its in rough shape. It needs a rebuild and had its compressor cover modified.
2. Punishment Racing mild steel 2.5" O2 housing. - $75.00
This was a direct replacement for the stock O2 housing. New they are $160.99, Given the condition and few years of use, I'll talke $75.
stores.punishment-racing.com/-strse-15/Mild-Steel-Recirculated-o2/Detail.bok
3. Forced Performance DSM Race Manifold with the 4 top bolts into the turbo - SOLD
49_983.jpg[/IMG]
4. Custom J-Pipe for a FMIC - SOLD
Also found some old stuff in storage I dont need.
5. Random IC pipes - Also from that FMIC kit from ETS. I have replaced them with different pipes. - Best Offer
one is a 45 flanged for 1g BOV, one is a 45 and longer section with no flange on it, and one is the same pipe with a greddy BOV flange on it. You figure out how to make them work for you.
6. Crushed 1g BOV - $25.00
7. Non Crushed 1g/colt BOV - This thing has its top clocked slightly different, and I was bored so I cleaned all the green off the top. - $25.00
*Please note, the Greddy BOV pictured on these pipes I no longer have.
8. Used Stock Cams and Gears from my 98 7-bolt 5 speed Talon. - Best offer
They had around 120k when they were removed from my motor. Both are marked with "A" on the ends.
Well, I think thats all for now. Thanks!