|
Post by badev0 on Jun 16, 2011 12:21:32 GMT -5
Does anyone know of any roll cage builders who do good work with really fair prices? Willing to drive to the west side. Looking to do a simple 6pt like this in chromoly: Thanks
|
|
|
Post by 99gst_racer on Jun 16, 2011 14:40:08 GMT -5
Troxxel's out of Bridgman does awesome work, but they're usually pretty backed up and slow about getting jobs done. They are the ones that did all of the chassis work in pumpgasgsx's RWD 2G.
|
|
|
Post by badev0 on Jun 16, 2011 14:47:25 GMT -5
Thanks for the info. I am hoping to find a place that can do it in 5 work days. I'll keep them in mind!
|
|
|
Post by 99gst_racer on Jun 16, 2011 16:29:34 GMT -5
What about the shop that did the cage work in Pinder's 1G? They're in the detroit area too. I haven't seen their work in person though.
|
|
|
Post by badev0 on Jun 16, 2011 16:57:16 GMT -5
I'll have to PM him and find out
|
|
|
Post by tsimac on Jun 17, 2011 12:11:49 GMT -5
I had Thompson Racing Fabrication build my cage. They are located in Milan Mi
|
|
|
Post by turbo2liter on Aug 28, 2011 21:50:03 GMT -5
www.gofastzone.comjimmer cline is the owner of the site, and his shop is just north of 28th street in grand rapids... he does a TON of bars, cages, back 1/2, 3/4 cars... he did my brothers car, and a lot of the local cars that need cert cages for nhra, or ihra
|
|
BlacKWiDoW
Full Member
"Life at half speed is only half lived!"- Zach Brunsink 2008
Posts: 193
|
Post by BlacKWiDoW on Jan 25, 2012 1:26:54 GMT -5
go-fast-productions.com/ Site for the company... I'll vouch on the craftsmanship and people that are there! Jimer is a GREAT guy and very fair! For my car, Firebird, i could get he kit off of Jegs or something and he said it would cost 500 to install the 10 point cage after i bought it... GARENTES his work... Worth the call and trip, believe me!
|
|