|
Post by msp03 on Apr 7, 2007 19:45:03 GMT -5
This is by far my biggest and necessary mod, seeing how I blew the motor. Project includes: SpeedCircuit built block -forged chromoly rods from Pauter -forged 2618 aluminum Arias pistons -8.5:1 compression pistons -AWR baffled oil pan -01 626 single runner intake manifold -AWR motor mounts -Fidanza lightweight flywheel -Exedy Stage 1 Clutch -Microtech LT10 standalone EMS -RC 550 injectors Safety (not blowin this one up) -AEM wideband -AM Phnt EGT w/ TRE probe UPDATES...... She was up and running again as of july 11th 2007..... everything is going great the only thing that is different than the original plan is fuel and engine management. for break in purposes I have not updated the fuel system yet. for engine management I went with a SplitSecond unit tuned for a msp.(needs some more fine tuning come spring) deffinate hp gains, that I beileve are due to the flywheel and intake mani, or maybe just because I got used to driving a neon....I mean talon during the build.
|
|
|
Post by msp03 on Apr 7, 2007 19:49:58 GMT -5
|
|
|
Post by pinder91 on Apr 7, 2007 20:44:59 GMT -5
How is the car doing? I'd imagine it's pretty sick of sitting at Belle with all those other overnighters.
Oh yeah... where have you been???
|
|
|
Post by 99gst_racer on Apr 7, 2007 23:14:22 GMT -5
Damn Josh - I didn't even know you had an account on here....
What's the ETA on when she's up and running again?
|
|
|
Post by msp03 on Apr 9, 2007 8:20:24 GMT -5
I sent my head out to the guy building the motor so he just needs to install and time;) (bc I'm lazy)
I'm hoping I will be seeing the motor in the next couple of weeks. then it's time to install and break her in. after that I will install the injectors and microtech and start tuning.
So....I'm hoping she will be up and running with in a months time
|
|
|
Post by 2gDSMdynasty on Apr 13, 2007 10:17:39 GMT -5
This is by far my biggest and necessary mod, seeing how I blew the motor. Project includes: SpeedCircuit built block -forged chromoly rods from Pauter -forged 2618 aluminum Arias pistons -8.5:1 compression pistons -AWR baffled oil pan -01 626 single runner intake manifold -AWR motor mounts -Fidanza lightweight flywheel -Exedy Stage 1 Clutch -Microtech LT10 standalone EMS -RC 550 injectors Safety (not blowin this one up) -AEM wideband -AM Phnt EGT w/ TRE probe I'm sure there's more but thats all for now LOL that is Josh!! what up home boi??!
|
|
|
Post by pinder91 on Jun 28, 2007 19:50:13 GMT -5
I'm going to update for Josh. Fedex freight tracking confirmed that the motor will be delivered tomorrow (6-29) finally. We're gonna try and get her running sometime next week.
|
|
|
Post by SPOOLD on Jun 28, 2007 20:01:10 GMT -5
fuckin right! bout time
you know i'm always up for lending a hand if you guys want
|
|
|
Post by moespooled95 on Aug 10, 2007 20:14:12 GMT -5
is this hoe runnin yet? just being random.
|
|
|
Post by SPOOLD on Aug 11, 2007 6:51:19 GMT -5
i actually saw it for real last night for the first time in forever. good job josh
|
|
|
Post by autox4fun on Aug 11, 2007 7:35:33 GMT -5
Yup this bitch is up and running like a champ!
|
|
|
Post by msp03 on Dec 16, 2007 16:53:57 GMT -5
break in period is over.....just in time for some boosting in the snow!!!!!
parking lot drifting anybody(I mean "e-brakin") maybe some reverse donuts;)
|
|
|
Post by jesse on Dec 19, 2007 7:47:38 GMT -5
sell me my talon back. that thing was a pos but i miss it. lol
|
|