|
Post by sourcelx on Oct 22, 2008 4:24:56 GMT -5
Looking awesome. I wouldn't trust myself to touch the inside of a tranny,lol.
|
|
|
Post by dontfeedphils on Oct 22, 2008 5:21:39 GMT -5
It's looking pretty good. That little ball is a real pain in the ass, I've def lost it before, and when I got the car it didn't even have it in there so my center shaft was all over the place.
|
|
|
Post by badev0 on Oct 22, 2008 9:02:35 GMT -5
Yeah the ball is retarted. When I got the viscous off, I was trying to get the ball out and it wouldn't come out so I was like oh cool it won't get lost. Then like a minute later it was gone.
You could probably get one at a arts and crafts store LOL
|
|
|
Post by slow97tsi on Oct 22, 2008 11:24:42 GMT -5
Looking awesome. I wouldn't trust myself to touch the inside of a tranny,lol. HAHA me either, scott kept telling me to take mine apart.. was like mmk thanks no!
|
|
|
Post by badev0 on Oct 22, 2008 13:58:26 GMT -5
lol there's a vfaq write up for both 1g's and 2g's. Its easy stuff
|
|
|
Post by badev0 on Oct 26, 2008 16:15:01 GMT -5
Trans should be in tonight hopefully. Worked on a friends Evo today and figured I'd see what is 18"x9.5 rota p45r wheel looked like on my car. LOL
|
|
|
Post by SPOOLD on Oct 26, 2008 17:48:00 GMT -5
too much offset = mexican/vdub
|
|
|
Post by badev0 on Oct 26, 2008 20:58:23 GMT -5
Werd
|
|
|
Post by slow97tsi on Oct 26, 2008 21:43:34 GMT -5
you should buy a set looks good..... and sell me the others tehe..... kidding but ya should sell me the others
|
|
|
Post by badev0 on Oct 26, 2008 23:36:35 GMT -5
Yeah no thx. Trans is in though!
|
|
|
Post by badev0 on Oct 29, 2008 0:51:28 GMT -5
|
|
|
Post by spaz100 on Oct 29, 2008 11:31:24 GMT -5
mmmm, tasty
|
|
|
Post by Green92gsx on Oct 29, 2008 14:35:45 GMT -5
Looks killer man. All that goodness needs a nice intake manifold.
|
|
|
Post by badev0 on Oct 29, 2008 16:55:17 GMT -5
thanks guys. and yeah i plan on buying a jmf manifold before spring for sure.
|
|
|
Post by badev0 on Oct 29, 2008 19:02:04 GMT -5
Went out and bought some 4" aluminum piping for the intake and stainless piping for the exhaust. Mocked it up. Just have to cut another piece to get the exhaust pipe out the bumper then have it welded up. Ultra tight fit.
|
|