|
Post by CheapTalon on Oct 30, 2008 8:19:32 GMT -5
Make sure you have enough clearance with that exhaust. You don't want it rubbing or hitting the frame rail when the motor pitches. Other than that it looks good. That filter is a little ugly though, lol.
|
|
|
Post by badev0 on Oct 30, 2008 10:44:41 GMT -5
Yeah the filter is junk. I wont be running that one. I also will be cutting the frame a bit so It does not touch. Everything pictures is mock up.
thanks though
|
|
|
Post by prdsm on Oct 30, 2008 18:57:01 GMT -5
It this going to be a track only car or are you going to make it a daily driver? The reason I ask is because of the exhaust mock up. Looks nice lovin the mock up.
|
|
|
Post by badev0 on Oct 30, 2008 20:51:11 GMT -5
Not exactly a daily but I will be driving it ALOT. And thanks man. Should be up and running in 3-4 weeks.
|
|
|
Post by prdsm on Oct 31, 2008 7:27:33 GMT -5
did you elliminate you maf sensor or you have a different setup for that? I don't see one that why I ask.
|
|
|
Post by wishihadatalon on Oct 31, 2008 8:09:54 GMT -5
did you elliminate you maf sensor or you have a different setup for that? I don't see one that why I ask. Megasquirt uses a map (manifold air pressure) sensor which is another way of measuring air volume. All that you need is a vacuum line off of the manifold to the ecu, no restriction in the pipes and no crappy drivability if you have a boost leak.
|
|
|
Post by badev0 on Nov 4, 2008 1:55:38 GMT -5
|
|
|
Post by dontfeedphils on Nov 4, 2008 6:20:16 GMT -5
Looks really good. Are you going to shave down that exhaust pipe so it sits flush with the side of the bumper?
|
|
|
Post by badev0 on Nov 4, 2008 9:40:15 GMT -5
This is exactly how I plan on doing it: Shaving it a bit more, polishing it, then making the surrounding plate.
|
|
|
Post by badev0 on Nov 13, 2008 5:25:16 GMT -5
Installed a jay racing alternator kit. Picked up one of two wastegates! Check back friday for a start up video assuming the tracking status for my valve cover gasket is correct.
|
|
|
Post by gsxrtalon on Nov 15, 2008 22:31:25 GMT -5
Looks great man. Hope the start up goes good.
|
|
|
Post by badev0 on Nov 16, 2008 3:48:30 GMT -5
sure did
|
|
|
Post by sourcelx on Nov 16, 2008 21:45:13 GMT -5
Sounds good! Glad to see it up and running.
|
|
|
Post by badev0 on Nov 27, 2008 21:51:39 GMT -5
car is ready to be driven if i could figure out this fuel leak that randomly started, causing low fuel pressure, hard starting. either one of my ss braided lines are cut or the fitting thats under the car is bad. re cut the lines and re sealed the fittings, still no good. damn car
|
|
|
Post by badev0 on Dec 3, 2008 15:09:43 GMT -5
|
|