|
Post by 92redLaser on Mar 16, 2009 11:05:29 GMT -5
this winter we'll see how can pull better donuts behind advance since ill have the laser....
|
|
|
Post by prdsm on Mar 16, 2009 18:51:21 GMT -5
If everything goes as planned the talon will be sleeping this coming winter. So no donuts for me...
|
|
|
Post by 92redLaser on Mar 17, 2009 16:20:34 GMT -5
yea yea we'll see i might no be drivin the laser in the winter either depends on if we sell the 1.8
|
|
|
Post by prdsm on Mar 22, 2009 20:19:34 GMT -5
short update.
New valvecover installed ( looks great thanks Edwin) new spark plugs and fat wires installed new headlights installed
Next up will be installing my afpr, my safc, wastegate gaste and dump pipe ( it fell off over the winter but never put it back on) fix my exhaust problem. Install new tie rod end, ball joint, new rotors and brakes.
Them TUNE IT
Plans for the future New clutch ( stage 3 or stage 4 not sure what I am going with yet) New suspension all the way around. My car is starting to lean when I get in it and looks Like a monster truck because of the wheel gap.
|
|
|
Post by prdsm on Mar 31, 2009 17:35:39 GMT -5
got some 550 cc injectors coming in the mail ;D ;D.
fix my exhaust and wastegate today, afpr, safc, balljoint ect will be installed this weekend getting it ready for 11th test and tune at martin anyone down?
|
|
|
Post by 92redLaser on Apr 7, 2009 13:53:44 GMT -5
hopefully me and rach will be... got the mbc's last night just need to install.... and then figure out the alternator problem... on the talon... doubt the laser will be there but maybe have to fix the oil and exhaust leak...
|
|
|
Post by prdsm on Apr 10, 2009 20:33:34 GMT -5
550 cc injector, safc,afpr install tommorrow and hopefully a little tuning and getting ready for a maft and more tuning.
balljoint, tie rod, rotors tommorrow as well. go fast or go home gir dun man. ;D ;D ;D
|
|
|
Post by prdsm on Apr 20, 2009 20:00:35 GMT -5
gm maft, injectors, rotor, tie rod installed and my baby runs great. Also installed this, Just need to install the center caps and Just need to rotate them.( directional tires all on backwards) Thanks nissantouge87!!!!
|
|
|
Post by CheapTalon on Apr 20, 2009 20:02:11 GMT -5
Needs lowered! Looks good though.
|
|
|
Post by laser92 on Apr 20, 2009 20:02:50 GMT -5
wow, those look tiny! lower that bitch!
|
|
|
Post by prdsm on Apr 20, 2009 20:05:24 GMT -5
the tires are 205 40's and I just took the jack off the car so it is a little higher than normal but yes it will be getting lower sooner or later.
|
|
|
Post by pimpinshmitty on Apr 23, 2009 11:49:32 GMT -5
Hay yeah so riding all the way home with a shake wasn't so bad lol... eric loves the stock rims and i wish i had those damn rims lol. so cross your fingers i might be gettin my vry own 4g63 in like another week! hope those tires treet you well! (they rock in 6 in of snow lol)
|
|
|
Post by prdsm on Apr 30, 2009 18:48:21 GMT -5
|
|
|
Post by sourcelx on Apr 30, 2009 20:54:40 GMT -5
umm ,yea hehe... thats somthin else...
|
|
|
Post by prdsm on May 13, 2009 20:56:16 GMT -5
compresion test today Results 114, 114, 100, 125 But still runs smooth might retest to verity.
|
|